Inserting The Licence Plate; Adjusting The Lamp Position - Minnid e.base Instrucciones De Uso

GB
6

Inserting the licence plate

Ø Slide the licence plate from below into the
holder provided.
Ø Press the licence plate upwards until it
snaps into place below.
Ø Make sure that the licence plate is fixed in
place.
1.240.160BA_20191212
7

Adjusting the lamp position

> 380 mm
Ø Check the distance between the outside
edge of the vehicle and the lamp holder.
Ø If the distance is greater than 380 mm,
proceed as follows:
Ø Open the quick release devices.
Ø Pull the lamps outwards.
23