Adjustments (Expert Mode); Adjusting The Picture Brightness And Contrast - Sony GDM-W900 Manual De Instrucciones

Adjustments (Expert mode)

You can adjust more in detail in the expert mode than in the
normal mode.
Before adjusting
• Connect the monitor and the computer, turn them on and
feed the signal to the monitor.
• Select "LANGUAGE" in the "OPTION" OSD, then select
"ENG" (English) on page 8.
Selecting the expert mode
1
Press the OPTION button.
The "OPTION" OSD appears.
OPTION
2
Press the ¨./> button to select "OSD MENU."
The "OSD MENU" turns yellow.
3
Press the >?// button to select "EXPERT."
Move the green p to EXPERT.
EXPERT
appears at the top right corner of the OSD in
Expert mode.
The "OPTION" OSD automatically disappears after about
30 seconds. To turn off the OSD, press the OPTION button
again.
OPT I ON
L ANGUAGE JPN ENG FRA
DEU ESP I TA
OSD POS I T I ON : R I GHT BOTTOM
OSD MENU NORMAL EXPERT
LOCK UNLOCK LOCK
I NPUT : BNC 84.4kHz/ 72Hz
SELECT SET
OPT I ON
L ANGUAGE JPN ENG FRA
DEU ESP I TA
OSD POS I T I ON : R I GHT BOTTOM
OSD MENU NORMAL EXPERT
LOCK UNLOCK LOCK
I NPUT : BNC 84.4kHz/ 72Hz
SELECT SET
OPT I ON
EXPERT
LANGUAGE JPN ENG FRA
DEU ESP I TA
OSD POS I T I ON : R I GHT BOTTOM
OSD MENU NORMAL EXPERT
LOCK UNLOCK LOCK
I NPUT : BNC 84.4kHz/ 72Hz
SELECT SET / ADJUST
Adjusting the picture
brightness and contrast
The adjustment data becomes the common setting for all
input signals received.
1
Press the ¨./> button or the >?// button.
The "BRIGHTNESS/CONTRAST" OSD appears.
BR I GHTNESS / CONTRAST
CONTRAST
BR I GHTNESS
PRESET 1
SELECT SET / ADJUST
2
Press the ¨./> button to select "PRESET" and the
> ?// button to select a preset number.
When you want to use the monitor later in the same
condition, just select the same preset number.
3
Press the ¨./> button or the >?// button to
adjust the brightness or contrast.
¨ BRIGHTNESS:
Adjusts the picture brightness.
> CONTRAST:
Adjusts the picture contrast.
The OSD automatically disappears after about 30 seconds.
To turn off the OSD, press the ¨./> or >?// button
again.
To reset, press the RESET button while the OSD is on. The
selected preset number is reset.
EXPERT
10
2 3
2 3
13
EN
F
D
ES
I
J