Adjustments (Normal Mode) - Sony GDM-W900 Manual De Instrucciones

Adjustments (Normal mode)

You can adjust the picture to your preference.
This monitor has two levels of adjustment mode, normal
and expert.
Before adjusting
• Connect the monitor and the computer, turn them on and
feed the signal to the monitor.
• Select "LANGUAGE" in the "OPTION" OSD, then select
"ENG" (English) on page 8.
Selecting the normal mode
1
Press the OPTION button.
The "OPTION" OSD appears.
OPTION
2
Press the ¨./> button to select "OSD MENU."
The "OSD MENU" becomes yellow.
3
Press the >?// button to select NORMAL.
Move the green p to NORMAL.
The "OPTION" OSD automatically disappears after about
30 seconds. To turn off the OSD, press the OPTION button
again.
OPT I ON
L ANGUAGE JPN ENG FRA
DEU ESP I TA
OSD POS I T I ON : R I GHT BOTTOM
OSD MENU NORMAL EXPERT
LOCK UNLOCK LOCK
I NPUT : BNC 84.4kHz/ 72Hz
SELECT SET
OPT I ON
L ANGUAGE JPN ENG FRA
DEU ESP I TA
OSD POS I T I ON : R I GHT BOTTOM
OSD MENU NORMAL EXPERT
LOCK UNLOCK LOCK
I NPUT : BNC 84.4kHz/ 72Hz
SELECT SET
OPT I ON
L ANGUAGE JPN ENG FRA
DEU ESP I TA
OSD POS I T I ON : R I GHT BOTTOM
OSD MENU NORMAL EXPERT
LOCK UNLOCK LOCK
I NPUT : BNC 84.4kHz/ 72Hz
SELECT SET
Adjusting the picture
brightness
The adjustment data becomes the common setting for all
input signals received.
1
Press the¨ (brightness) ./> button.
The "BRIGHTNESS/CONTRAST" OSD appears.
2
Press the ¨./> button again to adjust picture
brightness.
. . . . for less brightness
> . . . for more brightness
The OSD automatically disappears after about 3 seconds.
To reset, press the RESET button while the OSD is on. The
brightness and contrast are both reset.
Adjusting the picture contrast
The adjustment data becomes the common setting for all
input signals received.
1
Press the > (contrast) ?// button.
The "BRIGHTNESS/CONTRAST" OSD appears.
2
Press the >?// button again to adjust picture
contrast.
?. . . for less contrast
/ . . . for more contrast
The OSD automatically disappears after about 3 seconds.
To reset, press the RESET button while the OSD is on. The
brightness and contrast are both reset.
BR I GHTNESS / CONTRAST
2 3 10
BR I GHTNESS / CONTRAST
2 3 10
9
EN
F
D
ES
I
J