NeuLog USB-200 Manual De Uso página 18

18
Home
NeuLog USB module USB-200
The NeuLog USB module is the easiest way to connect
the whole NeuLog sensor line and RF module, to any
computer with a USB port.
The USB module acts as a bridge between the sensors
and your computer's hardware by both translating
incoming data from the sensors and by providing power
to the sensors.
Connection to computers is done through a standard
USB to mini USB cable included in the package. The only
requirement is for the computer to have a USB port.
Using NeuLog USB modules
As with all NeuLog devices, using the USB module is very
quick and easy.
Materials needed:
 USB module (USB-200).
 Any NeuLog sensor.
 Free NeuLog browser based application.
The browser based application can be downloaded for
free at www.NeuLog.com as well as a full application
user guide.
Choose "Downloads" on the main menu and then
choose "Software and Application".
V2018.01 English