NeuLog USB-200 Manual De Uso página 21

4. Connect whichever sensors you wish to use into the
left side of the second RF module (which is
connected into the battery).
Note: You can conduct experiments with up to 5
NeuLog sensors using the RF modules.
5. Open the NeuLog application (i.e the Neulog logo on
your desktop) and automatically begin searching for
sensors.
6. Once your sensors are detected you are ready to
begin collecting data wirelessly.
For reference, the image below demonstrates roughly
how your setup should appear.
For more information see the RF module user guide.
V2018.01
21
Home
English