Publicidad
Idiomas disponibles
Idiomas disponibles
USB with RF modules:
Using NeuLog RF modules with a USB module and
sensors provides a much more flexible system in which
students can collect data around their lab bench while
wirelessly streaming data in realtime to the NeuLog
application at their workstation.
Once you have paired two RF communication modules
to the same RF ID number (1 through 9) you can begin
connecting Neulog modules and sensors together. It
may be easiest to imagine the RF communication
modules as a long cable between the sensor and the
USB module.
1. Connect the USB module into a computer using the
included USB to mini USB cable.
2. Connect one of the paired RF modules to the left side
of the USB module.
3. Separately, connect the second RF module into the
left side of a charged battery module.
Note: press and hold the button on the front of the
battery module: if a light comes on, than the battery
has sufficient power. If no light comes on, than you
must charge the battery some more.
V2018.01
20
Home
English
Publicidad
