Publicidad
Idiomas disponibles
Idiomas disponibles
USB usage with sensors:
Using the USB module with any NeuLog sensor (up to 20)
plugged directly into it is the easiest and most
straightforward way to collect data.
1. Download the completely free NeuLog application
from
www.NeuLog.com
"materials needed" section above.
2. Connect the micro USB end of the included cable
into the USB module.
3. Connect the regular USB end of the included cable
into any open USB port on the smart device.
4. Connect any NeuLog sensor (up to 20) for the
experiment directly into the left side of the USB
module. No cables are required to plug modules and
sensors together. They plug directly into each other.
5. Open the NeuLog application (i.e the NeuLog icon on
your desktop). The application will run through your
default internet browser (Chrome, Mozilla, Safari, etc.)
though you don't need to have an active internet
connection.
6. The
application
connected sensors. If you wish to connect more
sensors you can simply click the "Search for Sensors"
button after doing so.
7. You can begin collecting data.
V2018.01
19
as
will
automatically
described
detect
Home
in
the
all
English
Publicidad
