NeuLog USB-200 Manual De Uso página 22

22
Home
USB at off-line mode:
Using the USB module with several NeuLog sensors
plugged directly into it can also be used with off-line
mode.
The USB module and the Neulog application are used to
determine the off-line experiment parameters.
After running the sensors off-line with the battery
module, the USB module and the Neulog application are
used to upload the experiments data from the sensors to
the computer for examination and saving.
The experiments' data is saved in the sensors internal
flash memory up to 5 experiments.
The USB module can be used as the power source for
the sensors (instead of the battery module) and enables
to start the off-line experiment at once for all of the
connected sensors. This is for some complex
experiments where more than one sensor has a trigger
level and you want that the sensors' data will be
synchronized.
Included in package
 NeuLog General Guide.
 USB-200 module.
 USB to micro USB cable.
V2018.01 English