Service Life - Ottobock 4R103 Instrucciones De Uso

2.2 Area of Application
Approved for a body weight of up to 85 kg.
Ottobock recommends the use of structural components with a diameter of
34 mm when elevated loads are expected (e.g. for a transtibial prosthesis).
2.3 Environmental Conditions
Allowable environmental conditions
Temperature range for use: -10 °C to +60°C
Allowable relative humidity 0 % to 90 %, non-condensing
Unallowable environmental conditions
Mechanical vibrations or impacts
Perspiration, urine, fresh water, salt water, acids
Dust, sand, highly hygroscopic particles (e.g. talcum)

2.4 Service Life

In general, all modular adapters are tested by the manufacturer for 3 million
load cycles. Depending on the patient's level of activity, this corresponds to
a service life of 3 to 5 years.
3 Safety
3.1 Explanation of Warning Symbols
Warning regarding possible risks of accident or injury.
CAUTION
Warning regarding possible technical damage.
NOTICE
3.2 General Safety Instructions
CAUTION
Using the product without following the instructions for use
Deteriorating health condition and damage to the product because of fail­
ure to follow the safety information
► Observe the safety information in these instructions for use.
► Make the patient aware of all safety instructions marked with "Inform
the patient".
CAUTION
Excessive strain on the product
Fall due to breakage of load-bearing components
10 | Ottobock