Control Panel Description - Cebora 452 Manual De Instrucciones

2 CONTROL PANEL DESCRIPTION

AN. Knob
Selects LEDs AO AP AQ and sets their value, showing
it on the display AR.
AO. LED Thickness
This indicates that the display AR shows the thickness
in mm of the workpiece based on the current and wire
speed set. Active in synergic MIG/MAG processes.
AP. LED Wire speed.
This indicates that the display AR shows the welding
wire speed in metres per minute. Active in synergic
MIG/MAG processes.
AQ. LED Welding current
This indicates that display AR shows the welding
current in amps.
AR. Display.
This shows the value of magnitudes adjusted by
means of knob AN.
AW. Knob.
Selects LEDs AV AU AT and sets their value, showing
it on the display AS.
In synergic MIG/MAG welding processes, when LED
AT is on (welding voltage), the selection switches
automatically to LED AV (arc length).
AQ
AP
AO
AN
BA
BC
BE
.
AR
BD
AT. LED Welding voltage.
This indicates that the value shown on display AS is a
voltage expressed in volts.
With arc off, in MIG/MAG welding processes, the value
shown on display AS is a pre-set value. During the
welding process, the value shown on display AS is
always the voltage measured by the power source.
AU. LED Arc length.
In synergic MIG/MAG welding processes (MIG HD
excepted), this indicates that display AS shows the
value of the welding arc length correction. The 0 (zero)
value corresponds to the manufacturer preset arc
length. Knob AW can be used to adjust the value from
-9.9 to +9.9.
AV. LED Impedance.
In MIG/MAG welding processes, this indicates that
display AS shows the impedance value. The 0 (zero)
value corresponds to the manufacturer's preset
impedance. Knob AW can be used to adjust the value
from -9.9 to +9.9.
AS. Display.
This shows the value of magnitudes adjusted by
means of knob AW.
BA. LED Globular position.
In MIG/MAG synergic processes, this indicates that the
pair of current and voltage values chosen for welding
may generate arcs that are unstable and with ejected
materials.
AS
BH
BF BL
AT
AU
AV
AW
BB
BI
BG
7
7