Memory Menu; Remote Menu; Remote Only - Sony PFM-500A2WU Manual De Instrucciones

Using On-screen Menus

MEMORY menu

This menu is used for saving or recalling the settings
in the PIC CONTROL, PIC SIZE and CONFIG (only
for ENHANCE and H FILTER) menus.
M E M O R Y
@º
L O A D
S A V E
@¡
S E L E C T
ENTER
For details, see "Using the Memory" on page 28(EN).
@º LOAD
Recalls the preset settings.
@¡ SAVE
Saves the settings.
20 20
(EN)
C A N C E L
MENU

REMOTE menu

This menu is used for the remote control setting.
R E M O T E
@™
I N D E X N O .
@£
R E M O T E M O D E
R E M O T E O N L Y
@¢
S E L E C T
ENTER
@™ INDEX NO.
Sets the index number of the monitor.
Note
When you set the number, use the buttons on the
monitor.
For details on the index number, see "Operating a Specific
Monitor With the Remote Commander" on page 32(EN).
@£ REMOTE MODE
Select the Remote Commander mode.
TV: Sony monitors' or TVs' commander
PJ: Sony projectors' commander
OFF: Disables the remote control.
For details, see "Using the Other Remote Commander" on
page 33(EN).
@¢ REMOTE ONLY
Select ON to disable the front control buttons on the
monitor. The monitor can only be controlled with the
Remote Commander. While REMOTE ONLY is ON,
the indicators on the front panel go off.
To cancel the REMOTE ONLY mode, set REMOTE
ONLY to OFF with the Remote Commander, or press
the CTRL button while pressing the u switch. The
monitor turns to the standby mode and the REMOTE
ONLY mode is canceled.
The setting in this item is still retained when the AC
power cord is disconnected.
c
: 0 0 1
: T V
: O F F
C A N C E L
MENU