IKRA IEVL 1738 Instrucciones De Manejo página 31

Fault
Motor does not run
Roller does not rotate
Motor output drops
Poor scarifying perfomance
Noisy running, application vibrates
Fault, which cannot be rectified with the help of this table, may only be attended to be an authorized company
(workshop).
GB | Operating Instructions
Cause
No voltage
Roller blocked
Toothed belt defective
Working depth too high
Dirty housing
Lawn too long for scarifying
Working depth too high
Worn blades
Balde damaged
GB-11
Remedy
Check connection line and connec-
tion protection switch
Check roller
Workshop
Selected lower working depth
Clean housing
Lawn too long for scarifying
Select lower working depth
Replace worn blade
Workshop