Special Safety Instructions - Rothenberger ROTHERM 2000 Instrucciones De Uso

Ocultar thumbs Ver también para ROTHERM 2000:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 22
17 Avoid unintentional activation. When plugging the tool in, make sure that the switch is
turned off.
18 Use outdoor extension cords. When outdoors, use only extension cords that are approved
and appropriately marked.
19 Be alert. Pay attention to what you do. Approach your work sensibly. Do not use the electric
tool when you are distracted.
20 Check the electric tool for damage. Before using the electric tool, you must inspect safety
equipment or slightly damaged parts carefully to ensure that they work properly and as in-
tended. Check to see that the moving parts operate freely and don't stick, and to make sure
no parts are damaged. All parts must be mounted properly and meet all the conditions for
ensuring trouble-free operation of the electric tool.
Damaged safety equipment and parts must be properly repaired or replaced by a profes-
sional facility, unless otherwise indicated in the user manual. Damaged switches must be
replaced by a customer service facility.
Never use an electric tool whose switch cannot be turned on and off.
21 Caution. Using other insertion tools and accessories may cause injury.
22 Have your tool repaired by an electrical expert. This electric tool meets applicable safety
requirements. Repairs must be made only by an electrical expert using original replacement
parts. Otherwise accidents many occur.
1.3

Special safety instructions

The plug socket must be in accordance with VDE (Association of German Electrotechnical Engi-
neers) regulations, and must be fitted with a 10-amp fuse!
The electrodes achieve a high working temperature, so neither touch front part of the forceps or
electrodes during and after soldering.
After soldering has been completed, the soldering gun must be laid down in such a manner that
no flammable objects can ignite and no injuries can be sustained by any persons.
Change worn electrodes and electrode holders.
This device is not intended for use by children and persons with
physical, sensory or mental limitations or a lack of experience or
knowledge. This device can be used by children aged 8 and
above and by persons who have physical, sensory or mental lim-
itations or a lack of experience or knowledge if a person respon-
sible for their safety supervises them or has instructed them in
the safe operation of the device and they understand the associ-
ated dangers. Otherwise, there is a danger of operating errors and
injuries.
Supervise children during use, cleaning and maintenance. This
will ensure that children do not play with the device.
10
ENGLISH

Publicidad

Tabla de contenido
loading

Tabla de contenido