Display Brightness Regulation; Technical Data; Ec Declaration Of Conformity; Disposal - Bresser NATIONAL GEOGRAPHIC VA Colour RC Manual De Instrucciones

18 Display brightness regulation

1. When using battery power, touch the SNOOZE/LIGHT touch surface to activate the display for
about 7 seconds. Touch the surface several times to adjust the desired display brightness in steps:
dim - bright
2. In mains operation (DC 5V), touch the SNOOZE/LIGHT touch surface several times to set the de-
sired display brightness in steps: dim - bright - off

19 Technical data

Base unit
Power supply
Temperature unit
Temperature measuring range
Humidity measuring range
Time display
Time format
Calendar display
Time signal
Dimensions
Weight (incl. batteries)
Wireless sensor
Batteries
Maximum number of sensors
RF transmission frequency
RF transmission range
Maximum RF power
Temperature measuring range
Humidity measuring range
Dimensions
Weight (incl. batteries)

20 EC declaration of conformity

Hereby Bresser GmbH declares that the radio equipment type with 9070600 complies with Directive
2014/53/EU. The full text of the EC declaration of conformity is available at the following Internet ad-
dress www.bresser.de/download/9070600/CE/9070600_CE.pdf

21 Disposal

Dispose of the packaging materials properly, according to their type, such as paper or card-
board. Contact your local waste-disposal service or environmental authority for information
on the proper disposal.
24 / 48
5V DC 150mA USB power plug
Backup: 3x AAA
°C/°F
from 0°C to 50°C (from -32°F to 122°F)
RH 20% to 99 %
HH:MM / weekday
12 or 24 hours
DD/MM
DCF
150 x 26 x 150 mm (W x H x D)
304 g
2x AAA, 1.5V
3
433 MHz
30 m
< 10mW
from -40°C to 70°C (from -40°F to 158°F)
RH 20% to 99 %
50 x 25 x 93 mm (W x H x D)
47 g