Air Filter
A dirty air filter will reduce the life span of the engine, make it difficult to start the
engine, and reduce the unit's performance. Replace with new filter annually.
•
To clean, remove the screws then remove outer casing.
•
Remove the screws then remove air filter cover.
•
Remove the foam element.
•
Wash the foam element in solvent and let dry.
•
Pour a small amount of oil on the foam element then squeeze out, but do not
wring out excess oil. Foam element should be damp, but not dripping.
•
Reinsert the foam element into the air filter case.
Checking Muffler and Spark Arrester
•
Inspect muffler for crack,
corrosion, or other damage.
•
Remove screws, then remove the
muffler cover as shown.
•
Loosen bolt, then remove muffler
cap, muffler screen, and spark
arrester.
•
Check the muffler screen and
spark arrester for carbon deposits.
Remove carbon deposits with a
wire brush.
•
Check the muffler screen and spark arrester for
damage. If damage, replace with parts
specifically designed for this unit.
•
Install the spark arrester. Align the spark
arrester projection with the hole in the muffler
pipe.
•
Install the muffler screen and muffler cap.
•
Install the outer casing and tighten the screws.
English
MAINTENANCE
MAINTENANCE
Do not run the generator without reinstalling the
foam element or excessive piston and cylinder wear
may result.
•
•
•
Avoid contacting hot surfaces on this unit.
The muffler, engine and other parts can be
extremely hot.
Allow hot components to cool before touching.
17
Customer Hotline 1-800-445-1805