INSTALLATION INSTRUCTIONS
Disconnect electrical power at the fuse box or circuit breaker box
before installing microwave.
Failure to do so can result in death or electrical shock.
STEP 1 - UNPACK MICROWAVE OVEN
Use two or more people to move and install microwave oven.
Failure to do so can result in back or other injury.
1.
Using two or more people move the microwave close to the installation site.
2.
Open the four flaps on the carton top. From the top of the microwave, remove
the foam packing that contains the turntable and turntable ring.
NOTE:
Do not remove the foam packing from the front of the oven.
3.
Open the top of the plastic bag. Using two people, lift the microwave out of the
carton and gently set it front down on the foam packing. Remove the grease
filters and User Manual from the carton.
a
4.
Locate and remove the two screws attaching the mounting plate to the back of
the oven, and then remove the mounting plate.
WARNING
Electrical Shock Hazard
WARNING
Excessive Weight Hazard
b
6
Foam Packing
A
Carton
B