Before Using The Appliance The First Time; Operation - Unold 8150 Instrucciones De Uso

The manufacturer will not be liable in the event of incorrect assembly, improper or incorrect use or if
repairs are carried out by unauthorized third parties.

BEFORE USING THE APPLIANCE THE FIRST TIME

1. Remove all packaging materials
and any transport safety devices.
2. Clean all parts with a damp
cloth, as described in the chapter
"Cleaning and care".
3. Check to make sure that the appli-
ance is stable.
4. Connect the base via the power
cord to the power supply (230 V~,
50 Hz).
5. Remove the kettle from the base
and open the lid.
6. Add clear, cold water to the "Max"
marking.

OPERATION

1. Remove the kettle from the base
and open the lid.
2. Fill the kettle with at least 0.5 lit-
ers of water ("Min" marking). Do
not fill the kettle with more than
1.5 liters of water ("Max" mark-
ing).
3. Close the lid by pressing lightly
until it locks into place. The lock-
ing mechanism prevents the lid
from opening accidentally when
pouring water.
4. Place the kettle upright on the
base.
5. Switch on the kettle by pressing
the ON/OFF button. The control
lamp at the bottom of the handle
will turn on.
Copyright UNOLD AG | www.unold.de
7. Close the lid by pressing lightly.
8. Place the kettle on the base.
9. Switch on the kettle by pressing
the ON/OFF button. The control
lamp at the bottom of the handle
will turn on.
10. When the water boils, the appli-
ance automatically shuts off and
the indicator lamp goes out.
11. For hygienic reasons, please dis-
card the water from the first boil-
ing.
6. When the water boils, the appli-
ance automatically shuts off.
7. To make the water stop boiling
earlier, press the switch upward.
8. Caution: The automatic shut-off
function works only if the lid is
properly closed.
9. If you want to boil more water,
please allow the appliance to cool
off for a few minutes.
10. The appliance features boil dry
protection. When operated with-
out water or with excessive scal-
ing, the appliance shuts off auto-
matically. If this happens, please
allow the appliance to cool off
briefly before filling it with water
again or descale the appliance as
17