Step 1: Charger Assembly; Step 1: Charger Assembly Step 2: Charging And Getting Started With Innovo; Step 2: Getting Started With Innovo Step 3: Putting On The Shorts - Atlantic Therapeutics Innovo Instrucciones De Uso

STEP 1: CHARGER ASSEMBLY

STEP 1: CHARGER
Select the adapter for your country.
ASSEMBLY
1. Align the adapter with the charger. The word "TOP" is embossed
1. Align the adapter with the
on the charger and the adapters to show the correct orientation
charger, with adapter slots
(Fig. 3).
facing towards the charger
pins.
2. Place the "TOP" end of the adapter into the adapter recess,
press the other end firmly into the recess (Fig. 4). The adapter
2. Slide the adapter into place
will click into place.
on the charger until it clicks
into place
3. Ensure the adapter is firmly assembled before plugging the
charger into an electrical outlet.
3. Ensure the charger is fi rmly
assembled before plugging
the adapter into an electrical
Important:
outlet.
When disconnecting the adapter from the charger, always hold the
adapter before disengaging the "OPEN" button, to stop the adapter
4. To release the adapter from
springing away from the charger.
the charger, press the "PUSH"
button on the charger and
slide the adapter off.
d.
STEP 2: GETTING STARTED WITH INNOVO
STEP 2: CHARGING AND GETTING STARTED
WITH INNOVO
1. Before you start a treatment session, please ensure that the battery is
sufficiently charged. If the battery charge is low, connect the charger to the
controller and plug it into an electrical socket. You will need to move the sliders
1. Before you start a treatment session, please ensure that the battery is
inwards to enable you to do this (Fig. 5). You should charge the battery for
suffi ciently charge d. If the battery charge is low, connect the charger to
approximately 5 hours from flat. It is fully charged when all 5 bars of the battery
the controller and plug it into an electrical socket. You will need to move
symbol (
the sliders inwards to enable you to do this (Fig. 7). You should charge the
to complete approximately 5 sessions.
battery for approximately 5 hours from fl at. It is fully charged when all 5 bars
of the battery symbol (
2. We recommend that you wear high-thigh underwear which leaves your
should be suffi cient to complete approximately 5 sessions.
buttocks exposed, as the electrodes need to be in full contact with your skin to
deliver the INNOVO
2. Make sure your skin is clean and free from oils, lotions, moisturisers etc as
you can also use INNOVO
these may prevent the Shorts from functioning correctly.
toilet before starting a treatment session.
3. We recommend that you wear high-thigh underwear which leaves your
3. Follow this instruction manual and the Quick Start Guide carefully to ensure you
buttocks exposed, as the electrodes need to be in full contact with your skin
set up and apply INNOVO
to deliver the INNOVO
the information on restorethefloor.com.
you can also use INNOVO
your bladder before starting a treatment session.
4. Follow these instructions and Quick Start Guide carefully to ensure you set up
and apply INNOVO
information on myinnovo.com.
Fig. 3
Fig. 5
®
) on the display screen are visible. A full charge should be sufficient
) on the display screen are visible. A full charge
treatment programmes successfully (Fig. 6). Alternatively,
®
without underwear. It is advised that you use the
®
correctly. We strongly recommend that you review
®
treatment programs successfully (Fig. 8). Alternatively,
®
without underwear. It is advised that you empty
®
correctly. We strongly recommend that you review the
®
Fig. 3
Fig. 4
Fig. 6
Fig. 4
®
Fig. 5
Fig. 7
Open sliding doors
Fig. 6
Fig. 8
11
11