Unpacking/Assembly; Installation; Installation Area; Important - CEMB SM628 Manual De Uso

2.1. UNPACKING/ASSEMBLY

- Remove the upper part of the package and make sure that the accessory has not
suffered damage during transport.
Take the utmost care when unpacking, assembling, hoisting and installing The
accessory as described below. Failure to observe these instructions can damage.
The accessory and compromise the operator's safety.

3. InSTAllATIon

The installation of The accessory can be performed only by qualified employee au-
thorized by the manufacturer. Installation by unqualified employee will invalidate the
warranty on the device performance.

3.1 INSTALLATION AREA

The accessory must be installed in accordance with all applicable safety regula-
tions, including but not limited to those issued by OSHA.
RISK OF EXPLOSION OR FIRE. Never use the machine in an area where it will be
exposed to flammable vapours (gasoline, paint thinners solvents, etc.).
Never install the machine in a recessed area or below floor level.
IMPORTANT: for the correct and safe operation of the equipment, the ambient lighting
level should be at least 300 lux.
Do not install The accessory outdoors.
It is designed for use in an indoor, sheltered area.
User's manual
WARNING
CAUTION
WARNING
DANGER
CAUTION
CAUTION
EN
11