Parrot Sequoia Manual De Usuario página 11

Sunshine sensor
The sunshine sensor is used to calibrate the images depending on the
sunlight. This makes it possible to compare photos over time, despite
variations in light during photo shoots. The sunshine sensor is attached
on the upper part of the drone, facing the sky. During flights the sunshine
sensor is powered by the multispectral sensor.
1
2
3
Form Factor
4
Other sunshine sensor features:
• GPS /GNSS module.
• Inertial measurement unit.
• Magnetometer.
• Weight: 35g.
• Size:
59 mm
It is recommended to use a TS32GSDU3X SD card with Sequoia.
!
Performances are not guaranteed for other SD cards. Check SD
card compatibilities on www.parrot.com/entreprises/sequoia.
1
3
4
4 ambient light sensors. These sensors are fitted with band-pass
filters identical to those on the multispectral sensor.
Slot for an SD card.
Indicator light: Reference for calibration and indicates if GPS/
GNSS is enabled.
USB host port
multispectral sensor.
2
: connects the sunshine sensor to the
Sunshine
sensor
39.6 mm 18.5 mm
7