Parrot Sequoia Manual De Usuario página 25

2. Go to the Sequoia help page: www.parrot.com/uk/support/
3. Download the update file available in .plf format.
4. Copy the file to the root directory on your USB key without putting it in
a folder or renaming it.
5. Connect your micro USB OTG cable to the USB host port on the
multispectral sensor.
6. Connect the USB key containing the update file to the other end of
the cable.
7. Turn on Sequoia.
> The update runs automatically. During the update the multispectral
sensor light flashes orange (diagram I). Once the update is com-
plete the light turns green.
Via an SD
Before you begin make sure that the multispectral sensor is connected to
the sunshine sensor.
1. Connect your USB key to a computer and make sure that it contains
no files in .plf format.
2. Go to the Sequoia help page: www.parrot.com/uk/support/
3. Download the update file available in .plf format.
4. Copy the file to the root directory on your SD Card without putting it
in a folder or renaming it.
5. Insert the SD card in the sunshine sensor.
6. Turn on Sequoia.
> The update runs automatically. During the update the multispectral
sensor light flashes orange (Diagram J). Once the update is com-
plete the light turns green.
Diagram I
Diagram J
21