Parrot Sequoia Manual De Usuario página 21

4. Turn the drone on the X-axis (pitch axis) (Diagram G) until the
multispectral sensor indicator light changes colour.
Note: Once the calibration is complete the colour of the
multispectral sensor light varies depending on Sequoia's status.
For example, if the multispectral sensor memory is full, the indica-
tor light will flash yellow.
Radiometric calibration
1. Place the test pattern on a flat surface.
2. Make sure no shadows cover the test pattern.
3. Connect to the Sequoia web interface.
4. Push the Start radiometric calibration button.
5. Place the Sequoia over the test pattern. The camera must capture the
entire test pattern.
6. Press Start.
> A 10-second countdown appears, and the sensor takes three sets
of photos.
Diagram G
17