Updating Sequoia - Parrot Sequoia Manual De Usuario

Sunshine sensor
Problem
Continuous red
Flashing yellow
Calibration of the magnetometer
Steady purple
Flashing purple
Flashing green
Flashing blue
Radiometric calibration
Steady blue
Steady light green
GPS/GNSS
Continuous yellow
Continuous green
There are two ways to update Sequoia.
Via USB
To update Sequoia via USB you must use a micro USB OTG cable male
plug with a USB female socket (Diagram H).
1. Connect your USB drive to a computer and make sure that it contains
no files in .plf format.
20
Hardware malfunction
SD Card full
The sensor must be stationary for 1
second
The sensor needs to be calibrated
Calibration in progress (pitch axis)
Calibration in progress (roll axis)
Shot being taken
Monochrome sensors enabled
GPS /GNSS connection not established
GPS /GNSS connection established

UPDATING SEQUOIA

Diagram H