Descargar Imprimir esta página

Parrot Sequoia Manual De Usuario página 27

Ocultar thumbs Ver también para Sequoia:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 77
Note : Sequoia creates a folder for each sequence of shots. For
example, if you have taken a single shot and then a shot in burst
mode, you will have two different folders in the Sequoia memory.
3. For Mac: open Image Transfer. This will take you to the multispectral
sensor internal memory. You can retrieve the photos taken during the
flight.
Via Wi-Fi
1. Connect the multispectral sensor USB device port to a drone or a
USB battery.
> Sequoia turns on automatically.
2. Make sure that the Wi-Fi appears in the list of available Wi-Fi networks.
If not, press the multispectral button four times.
> The multispectral sensor indicator light flashes blue when Wi-Fi is
enabled.
3. Connect your computer, tablet or smartphone to the Wi-Fi network:
Sequoia_XXXX.
4. Open your internet browser and log on to the IP address 192.168.47.1.
5. Go to the Gallery tab and retrieve the photos taken during the flight.
Via an SD Card
1. Insert your SD card into an adapter which is compatible with your
computer.
2. Retrieve the photos taken during the flight.
You can also use the sunshine sensor as an SD card reader. To do this,
connect the sensor's micro USB device port to your computer.
!
Do not take out the SD card when Sequoia is on.
23

Publicidad

loading

Productos relacionados para Parrot Sequoia