Mounting Optional Components; Mounting Reflected-Light Illuminator; Mounting Spot Illuminator K Led Or Double Spot Illuminator K Led - Zeiss Stemi 508 Instrucciones De Manejo

Stereo microscope
Stemi 508
3.3

Mounting optional components

3.3.1

Mounting reflected-light illuminator

Various reflected-light illuminators can be used, depending on the case of application.
For fastening, defined interfaces have been provided on the microscope.
3.3.1.1 Mounting spot illuminator K LED or
double spot illuminator K LED
•
Move the microscope body (Fig. 8/1) into its
uppermost position via the focusing knob
(Fig. 8/2).
•
Insert the spot illuminator (Fig. 8/7) in the stand
by sliding the holder (Fig. 8/5) into the stand
guide (Fig. 8/4) from below and push it
upwards into the required position.
•
Plug the connection cable (Fig. 8/6) of the spot
illuminator into the lower socket of the Stemi
mount (Fig. 8/3).
The double
mounted in an analogical manner.
09/2017
INSTALLATION
Mounting optional components
spot illuminator is
435064-7144-008
Fig. 8 Mounting spot illuminator
ZEISS
21