Accessmatic Avanti 4000Z Manual De Usuario página 38

vanti
10. installation and adjustment of door leaves
As is shown in the left gure, if the door leaf can't be installed horizontally, it can
be tilted for installation
1, Lossen anti-drop wheel to make the anti-drop wheel at the lowest position.
2, Connect door leaf with hanger.
3, Door leaf is tilted by 5°-10°to make the hanger can be smoothly embedded
within the track.
4, Check the gap at the top of the track at 0.5mm (according to the actual adjust-
ment), then tighten the screw on the anti-drop Wheel.
5, Con rm the friction during the operation.
If the door leaf is hard to move, the following items should be checked to solve
the problem:
(1) The hanger is mounted vertically on the door leaf.
(2) Any friction between the anti-drop wheel and the top of the track.
(3) Any friction between the door leaf and frame.
(4) Any friction between the hanger and anti-drop device. Any friction between
the hanger and the rail.
the gap between anti-drop wheel and
the top of the track keep 0.5mm
(according to the actual adjustment)
Anti - drop device
Opening your life
Screw A
10