Accessmatic Avanti 4000Z Manual De Usuario página 43

vanti
Opening your life
Ajuste de la polea (Correa corta)
1. Loosen fastening nuts and adjusting nut to make adjusting plate in the far left (adjustable range of the tension increase).
2. Put one side of belt into the driving wheel of the tingling device. another side put into the driving wheel of another hanger.
3. Turn the adjusting nut clockwise with Six angle wrench (1Omrn), so that the adjusting plate will be moved to the right and the belt
tension increased gradually, Adjusting the belt tension to tighten four fastening screw suitably.
Fastening nuts
Adjusting nut
Adjusting plate
16. Installation of sensor
The sensor should be installed at the center of the door leaf.
The max installing height of sensors 3m. If more than 3 m.
Please con gure special sensor. Generally, install on both indoor and outdoor separately.
Please refer to the circuit diagram when wiring. More detailed installation details.
Please refer to the installation manual of our company.
Caution: Sensor terminal voltage of di erent manufacturers, di erent types varies, don't literally change.
15