Cooling Fluid Check; Stop Light Checks; Direction Turn Checks; Rear View Mirror Check - Benelli BN302 Manual Usuario

COOLING FLUID CHECK

Cooling luid level
Before using the bike, always check the
level of cooling luid. It is also necessary
to change cooling luid at the intervals
speciic in the periodical maintenance
and lubrication sheet.
To check the level of the cooling luid
Place the vehicle on a lat surface
1.
and keep it upright.
2. Check the level.
The liquid level must be between the
min. and max. levels.
If this is not the case, reset the level as
described in the speciic section.
MAX
MIN
NOTE:
The level of liquid refrigerant must be
measured while the engine is cool, since
it varies according to engine tempera-
ture.
https://www.motorcycle-manual.com/

STOP LIGHT CHECKS

• Turn the key to "
• Pull the front brake lever and press
• Make sure the rear light is not dam-

DIRECTION TURN CHECKS

• Turn the key to "
• Use the indicator switch and make

REAR VIEW MIRROR CHECK

Sit in the saddle and adjust the mirrors
for a correct vision behind you.
Make sure that mirrors are not damaged
or dirty.
91
".
the rear brake pedal alternatively and
make sure that the light switches on.
aged or dirty.
".
sure that they flash.
EN