TOHATSU M 60C Manual Del Propietário página 50

48
ENGINE OPERATION
5. Pull the starter handle slowly until you
feel engagement, keep pulling till you
feel less resistance. Then pull it quickly.
repeat if necessary until started.
1. Slowly
2. Quickly
3. Starter handle
6. Check the cooling water from cooling
7
water check port.
2
1. Idle port
2. Cooling water check port
ENOM01663-0
Side mount RC type
1. Be sure to install the stop switch lock
to the stop switch, and attach the stop
switch lanyard securely to the operator
or to the operator's PFD (Personal Flo-
tation Device.)
1 2
3
ENOF02356-0
1
ENOF01911-0
1
1. Stop switch lock
2. Insert the main switch key.
3. Set the control lever in the Neutral
position.
4. Raise the free throttle lever a little (both
of cold engine and warm engine).
ENON00504-0
Note
The free throttle lever can not be raised
when the control lever shift is in Forward or
Reverse.
1
N
3
1. Neutral (N)
2. Control lever
3. Fully opened (Forward)
4. Fully opened (Reverse)
5. Free throttle lever
6. Main switch key
7. Stop switch
ENOF00869 1
2
5
4
6
7
ENOF00870 1