TOHATSU M 60C Manual Del Propietário página 78

76
INSPECTION AND MAINTENANCE
1. Body
2. O-ring
3. Filter
4. O-ring
5. Cup
6. Indication of Fuel Flow
2. If present, disconnect hoses from the
fuel connector (male) and the fuel
pump.
3. Remove the cup, filter and O-rings
from the fuel filter body.
4. Check the wear and clogging for each
parts, and replace if necessary.
5. Remove fuel and any water or debris
from the cup, filter and hoses.
6. Reassemble all parts.
10
ENOM00096-A
Fuel filter (for fuel tank)
1. Remove the fuel pickup elbow of the
fuel tank by turning it counterclockwise
2. Clean the fuel filter and check the O-
ring. Replace it if necessary.
3. Reassemble all parts.
1
2
3
4
5
ENOF00096-B
6
1. Fuel pick up
2. Filter
ENOM00718-0
Engine Oil Line Cleaning
Oil filter and oil tank. Check the oil tank
and/or filter for entrapped water and dust.
1. Disconnect all pipes between the oil
tank and oil pump.
2. Clean out foreign matter.
3. Refit the pipes to the oil tank and
pumps, and then fill up with new
engine oil.
4. For air purging, refer to Item No. 5:
Fuel and Engine Oil.
1
2
ENOF00926-0