Terminal Block; Switching On The Device - Vimar ELVOX ECGF Manual De Instrucciones Para La Conexión Y El Uso

ECGF
1. Product characteristics:
Flush-mounting micro control panel for back-box installation for wired and radio control of tubular motors or resistive
loads via the two relay output channels. Power is supplied directly from the alternating current mains at 230 V AC.
The control panel has the following functions:
- Operating mode selection to control a motor or to control 2 resistive loads (eg, lights)
- Separate inputs for opening and closing
- LED and buzzer for programming
- Programming push button
- Integrated receiver at 433.92 MHz with capacity for 15 remote controls with 2 rolling code channels
Technical characteristics:
Housing dimensions
Protection rating
Power supply
Consumption in standby
Relay contacts rating (AC @240V)
Relay contacts rating (DC @30V)
Output type
Receiver memory
Remote control encoding and working
frequency
Operating temperature

2. Terminal block

Terminal no.
1
2
3
4
5
6
7

3. Switching on the device:

When switching on, the device emits:
- 1 beep with a low tone of 1 s if there is at least one remote control saved
- 2 beeps with a low tone if there are no remote controls saved
12
42 x 36 x 21 mm
IP20
100 to 240 V AC (50/60 Hz)/DC
0.3 W
5A (resistive load)
2A (electric motors)
5A (resistive load)
Monostable
Bistable
Timed
Motor control
30 channels (15 2-channel remote controls)
Rolling Code
-20/+40°C
Description
Input 1 (controls output 1)
Input 2 (controls output 2)
Power supply input neutral (AC), negative (DC)
Power supply input live (AC), positive (DC)
Relay common
N.O. contact relay 1 (resistive load), direction 1 (electric motor)
N.O. contact relay 2 (resistive load), direction 2 (electric motor)
EN