Saeco SYNTIA Sup 037DRC Instrucciones De Uso página 35

• When the solution in the tank is
fi nished dispensing, the icon on the
side is displayed to indicate that the
selector dial must be brought back to
Red
the " " position.
• The icon indicates that the tank must
be rinsed and fi lled.
Rinse the water tank thoroughly and
refi ll it with fresh drinking water.
Red
• Empty the container used to collect the
liquid dispensed by the machine and
place it under the steam wand.
• When inserting the tank filled with
water in the machine, the icon on the
side is displayed; turn the selector dial
clockwise to position "
Red
• The machine starts the rinse cycle.
Red
• When the water in the tank is fi nished
dispensing, the icon on the side is
displayed to indicate that the selector
dial must be brought back to the " "
Red
position.
• The icon indicates that the tank must
be rinsed and fi lled.
Rinse the water tank thoroughly and
refi ll it with fresh drinking water.
Red
• Empty the container used to collect the
liquid dispensed by the machine.
Red
".
• When inserting the tank filled with
water the icon on the side is displayed.
Press the " " button to quit the
descaling cycle.
• The machine now carries out the
warm-up and rinse cycle to prepare for
product brewing.
If the machine is switched off
during the descaling cycle,
the next time the machine is switched
on the cycle must be repeated from
the beginning.
The descaling solution is to
be disposed of according
to the manufacturer's instructions
and/or regulations in force in the
country of use.
Remarks on Descaling
The machine you have purchased is
equipped with an advanced software to
check the quantity of used water in order
to provide reliable information about the
right time to carry out descaling opera-
tions.
This software has been programmed for
standard water hardness.
In case of especially hard water (high
calcium content), descaling cycles might
have to be carried out more frequently,
even if the machine does not display
warning signals.
Even if the machine is not used often
(e.g. 1 coff ee per day), it is recommended
to perform descaling cycles more fre-
quently.
In these specific cases, it is recommended
to perform descaling cycles every 1-2
months, even if the machine does not
signal it.
• 35 •