Close the slide holder and press the edges so that it locks in place.
Hold it in the position as shown in the film & photo scanner.
Insert the Slide Holder into the slot on the right side of the film & photo
scanner as shown.
5: Loading Negatives
Hold up the negative toward the light. As you look through the negative
you should be able to read the small negative numbers normally (not a mirror
image).
Now turn the negative so the image is upside down while looking at the
same side.
Open the negative holder at the marked spot on the top.
With the negative holder laid open place the negative into holder so the
notches line up with the notches on the holder.
6