6: Loading Photo - Reflecta 64220 Manual De Usuario

Note: Handle negatives with care. Any dust, scratches or fingerprints will
show up on your saved images. If possible use cotton gloves when handling
negatives. It is recommended to use compressed air to remove any dust on
the negatives. This is not included with the film & photo scanner but can be
purchased from an office supply or electronics retailer.
Close the negative holder and press the edges so that it locks in place
Hold it in the position as shown in the film & photo scanner.
Insert the negative holder into the slot on the right side of the film & photo
scanner as shown.
Film Holder: The design of the film holder follows ISO standard. In some cases
the holes on the film will not match exactly to the alignment of the holder. This
is caused by a non-standard camera. In this case there will be a small black
line on the edge of the frame that can easily be cropped out using photo editing
software.
ISO-- International Organization for Standardization

6: Loading photo

Photo tray
Left bracket Right bracket
7