Positioning And Levelling - AEG L 61270 BI Manual De Instrucciones

28 www.aeg.com
WARNING!
Remove all the packaging and
the transit bolts before you install
the appliance.

13.2 Positioning and levelling

Never place cardboard, wood or
similar materials under the ma-
chine to compensate for any un-
evenness in the floor.
If it is impossible to avoid positioning
the machine next to a gas cooker or
coalburning stove, an insulating panel
covered with aluminium foil on the side
facing the cooker or stove, must be in-
serted between the two appliances.
12. Put the plastic caps in the holes.
You can find these caps in the user
manual bag.
We recommend that you keep
the packaging and the transit
bolts for when you move the ap-
pliance.
• Install the machine on a flat hard floor.
• Make sure that air circulation around
the machine is not impeded by car-
pets, rugs etc.
• Carefully level by screwing the adjust-
able feet in or out.
• After having levelled the appliance,
tighten the lock nuts.
• The appliance must be level and sta-
ble.
Before placing it on small tiles, apply a
rubber coating.
The water inlet hose and the drain hose
must not be kinked.
CAUTION!
The machine must not be instal-
led in rooms where the tempera-
ture can drop below 0°C.