Technical Data - Telcoma STEALTH Instrucciones De Uso

CHARACTERISTICS AND PARTS DESCRIPTION
The Stealth automatism is not only versatile,but also easy to install thanks to various design features. It consists of two
different units: one is the MASTER complete with control unit and built-in feeder,while the other is the SLAVE (motor only).
The system requires a 230V supply line while the motors and all the auxiliaries are 24Vdc; buffer batteries (optional) may be
inserted for special applications or the SUN-POWER kit used to make the system independent by working off solar power.
The movement of the articulated arm is smooth and irreversible; its travel can be limited through built-in mechanical stops.
Each individual actuator can be released with a coded key if the gate needs to be moved manually.
The control unit located inside the MASTER motor acknowledges the obstacles that stop or slow down the travel of the gates
with an adjustable sensitivity; safety edges (8.2 K ohm) may be connected directly to the control unit if necessary. In addition to
the various options in the card, other controls and customisations are possible with the new programmer Prg-Link withWi-Fi
interface (optional).
Description of the parts (fig.A)
1. gearmotor cover
2. release mechanism protective lock
3. straight arm
4. arm cover
5. curved arm
6. gateclampingbracket
7. mechanical stops
8. motor fastening bracket
9. release mechanism protective door
10. motor release lever
11. compartment for buffer batteries (optional)
12. electronic control unit (Master only)

TECHNICAL DATA

MOTORE
Power supply voltage
Motor voltage
Max. motor current
Max. absorbed power (24V)
Maximum torque
Max. gate weight
Max. gate length
90° Opening time
Duty cycle intensity
Mechanical stops
Protection class
Operating temperature
Weight
Control unit
Control unit power supply
Compatible with Sun Power
Electronic deceleration
Inputs for 8K2 safety edges
Battery compartment
U.M. STEALTH
Vac 230
Vdc 24
A 6
W 150
Nm 250
Kg 250
mm 2500
s 10
40 cycle/h
Yes
IP 44
°C -20 +55
Kg 10
mod. A624
Vdc 24 ± 10%
Yes
Yes
Yes
mod. 2 X 12V 2.2Ah (optional)
UTILISATION LIMITS
Kg
300
200
100
1
Max. gate length
"The shape of the gate leaf, an
incorrect installation and/or the effect
of wind can compromise the limits
shown in the drawing"
GB
2 3
m
40