Esoteric Grandioso C1X Manual Del Usuario página 11

G
DC power input/output connectors (DC IN/DC OUT)
Use the 2 included DC (direct current) power cords to connect
the DC power input (DC IN) connectors of the main unit with
the DC power output (DC OUT) connectors of the power supply
unit.
DC OUT L e DC IN L
DC OUT R e DC IN R
o Power cords connected to AC inlets should always be
unplugged from outlets before DC (direct current) power
cords are connected or disconnected.
o The DC power cords have arrows printed on them. Connect
them so that the arrows point in the direction shown in the
illustration on page 10.
Check the orientation of the pins and the arrows of each DC
power cord and hold it by its plug. Align the marks on the
plug and the connector and push it in completely until it
clicks into place. When disconnecting, hold the ring and pull
it straight out. When connecting or disconnecting power
cords, do not angle or wiggle the plugs.
o Be careful not to pinch your fingers in the ring when con-
necting or disconnecting a DC power cord.
Connector
Align the marks
when connecting.
When disconnecting, hold the ring
and pull it directly out.
Plug
V
Never connect these to anything other than a
Grandioso C1X main unit. Doing so could cause
damage.
H
Trigger output (TRIG OUT) connectors
These output trigger signals linked to power operations of this
product.
Do not connect anything to these connectors when not using
them.
o To use these connectors, the TRIG_O trigger signal output
setting must be set to ON.
I
LED brightness adjustment knob
Turn to adjust the brightness of the power indicator.
J
AC power inlets (~IN)
Connect the included AC power cords to these AC inlets. After
completing all other connections, plug the power plugs into
power outlets.
V
Use only genuine ESOTERIC power cords. Use of
other power cords could result in fire or electric
shock.
V
Disconnect the power plugs from the outlets if you
will not use the Grandioso C1X for a long time.
11