Putting The Grandioso C1X Into Standby; Dimmer; Muting The Output - Esoteric Grandioso C1X Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Basic operation (continued)
Putting the Grandioso C1X into standby
There might be noise from the speakers if the unit is turned off sud-
denly. Follow the steps below to put the unit into standby.
1
If a connected device is playing back, stop
playback.
2
Turn the power amplifier off.
3
Press the STANDBY/ON button to put the
Grandioso C1X into standby mode.
4
Turn off the connected input source device.
18

Dimmer

Use this to adjust the brightness of the main unit's display.
DIMMER 3
c
DIMMER 2
(normal brightness)
c
DIMMER 1
c
(off )
o Even when the dimmer is off, the display will light at normal
brightness for a few seconds when you press a button or turn a
knob.
o Even when set to DIMMER 1 or off, setting menus and error mes-
sages will be shown with normal brightness (DIMMER 2).

Muting the output

Press the MUTE button to temporarily mute the sound. Press again to
restore the volume setting.
o When muted, "MUTE" blinks on the screen.
o You can also restore the sound by pressing the VOLUME buttons
(+/−) or by turning the VOLUME knob.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido