Publicidad
Idiomas disponibles
Idiomas disponibles
RV-245.book Seite 46 Freitag, 25. November 2005 4:25 16
Mounting the external camera
Through-holes for the camera connection cable
Feed the connection cable (see fig. 10.D, page 11) through existing through-
holes where possible or other openings such as ventilation grids. If there is no
other option, drill a Ø 13 mm hole. Check beforehand that there is sufficient
room for the drill head to emerge once the hole has been made.
➤
Drill a hole of Ø 13 mm in the vacinity of the camera.
➤
Grind all drill holes that have been made in the sheet metal and apply rust-protection.
➤
Place a cable sleeve in all sharp edged ducts.
Fixing the camera in the camera holder
No. in fig. 10.E,
page 11
1
2
Only use the hexagon socket bolts supplied to fit the camera in the camera
holder (see fig. 10.E, page 11). Longer screws will damage the camera.
➤
Push the camera into the camera holder and align it so that the lens forms an angle
of approx. 50° (see fig. 10.E, page 11) to the perpendicular axis of the vehicle.
➤
First fix the camera in position loosely with two hexagon socket bolts (see fig. 10.E3,
page 11).
These bolts and the other 4 bolts (see fig. 10.E4, page 11) are tightened when the
camera is aligned using the monitor.
We recommend greasing the threads of the bolts to prevent corrosion.
46
Quan-
Parts required
tity
1
Camera holder
6
Hexagon socket bolts
PerfectView CRT245
Publicidad
