Blackout Function; After Use; System Settings - afx light DMX512-PRO Manual De Instrucciones

1. Call the programming mode. For this, keep the REC pressed until the LED above
the button lights.
2. Press the button CHASE.
• The control LED lights.
3. Keep the button DEL pressed and select the chase to be deleted with the number
buttons 1-16.
• The control LEDs of the memory banks containing data light.
• If necessary, use the button PAGE to switch between the two channel groups 1-16
(LED A lights) and 17-32 (LED B lights).
• To confirm the deleting procedure, all LEDs of the controller flash three time.
4. After the desired chase has been deleted, switch off the programming mode. For
this, keep the button REC pressed until the LED above the button lights.

Blackout Function

With the blackout function it is possible to blackout and illumination scene or chase
completely. Current fadings and chases are not stopped by the blackout function,
they continue "in the dark" in the meantime.
1. With the button BLACK OUT/DEL this function is switched on: The LED above the
button flashes and all control channels are set to the output value zero.
2. By pressing the button BLACK OUT/DEL again, the function stops: The LED is
extinguished and all channels return to their pervious output values.
3. In the system settings, is possible define whether all control channels react to the
button BLACK OUT/DEL or only the dimmer control channel.

After Use

After the operation, disconnect the mains plug of the power supply unit from the
socket, to prevent unnecessary power consumption.

SYSTEM SETTINGS

This mode allows you to change important system settings for the controller.
1. Patch fixture
Fig. 8.1 Calling the system settings
1. Keep the button MENU for 2 seconds to call the system settings.
• The display indicates the first menu item "01.Patch fixture".
2. Turn the pan wheel to browse the menu items.
3. Press the button ENTER to select the desired menu item.
4. Turn the pan wheel to change a setting and confirm with ENTER.
5. Shortly press the button ESC to abort the setting procedure and return to the main
menu level.
©Copyright Lotronic 2018 Manual DMX512-PRO 19