dirna Bergstrom bycool DINAMIC 1.1 Instrucciones De Montaje página 18

DINAMIC 1.1
EN
Assembly
Recommendations
• Before starting assembly, please read instructions and
follow them during installation process.
• Use the adequate tools for each operation.
Electricity
• Disconnect ignition key.
• Disconnect battery before starting assembly.
• Make sure electric components are securely
connected, checking their correct fitting.
!
If, during assembly, the unit becomes slanted or
the cabin is tilted with the unit mounted, wait for
at least 60 minutes from the moment the unit is
horizontal before starting up.
Documentation included
Mounting instructions
User's guide
Troubleshooting
Warranty
Indications concerning position are:
RIGHT: Passenger side
LEFT: Driver side
Driving torques (N.m)
Steel Quality
Fillet
8.8
M6/100 10
Hoses assembly
Driving torques (N.m)
Hose size
Driving Torque
1/4"
3/8"
Caution
220.AA1.1008
220.AA1.1002
220.AA1.1003
220.AA1.0010
Wrench
opening
10.9
13 10
Fitting
Tool
13-15 Wrench 14 mm
15-17 Wrench 19 mm
Ratchet wrench of 10
Cruciform screwdriver TOP 10
Wrench of 10, 11, 14, 17, 19
Allen key of 6
Socket wrench of Ø10
Broach Ø 4
Drill
Broach Ø6
Circular saw Ø19, 22, 48
Scissors
Riveter M6
Fragile
Beware of cuts!
Electrical hazard
!
The installing personnel must have a sufficient training in
vehicles air conditioning.
!
dirna Bergstrom, s.l. shall not be responsible for
breakdowns or damages coming from an inadequate
handling or installation of the equipment or from
modifications and substitutions carried out without our
express and written authorisation.
!
Amount of refrigerant gas load R-134a to be
introduced in the circuit: 300 g.
!
Please see product warranty procedure included in
Troubleshooting.
!
Please see equipment User's Guide for its correct
functioning of the remote control and control panel.
!
Once installation is finished, the following documents
must be handed over to the user: User's Guide,
Warranty and Troubleshooting.
18
Air conditioning for vehicles
Tools
Symbology
! Warnings