dirna Bergstrom bycool DINAMIC 1.1 Instrucciones De Montaje página 23

DINAMIC 1.1
On the studs, thread (4) M6 nuts with (4) flat
8
washers Ø 6, which should be level with the
cover.
SEE ATTACHED DIAGRAM
VERY IMPORTANT
!
In the case of slanting upholstery, the evaporator
unit must be vertical to prevent the condensation
water from dropping onto the upholstery.
Upholstery
Pass the waste water pipe through the bore of
9
the evaporator base and connect to the tray.
Pass the cabling through the Ø 35 bore
10
towards the exterior.
OPERATIONS VALID FOR ALL MODELS
Evaporator
bracket
Wastewater
tray
Drainpipe
10
Air conditioning for vehicles
Lorry sheet
OUTSIDE
M6 self-blocking
nut
Protector cap
M6 Stud
Wide ring flat
washer
Rubber washer
9
23
Upholstery
INSIDE
Evaporator M6 Nut
base (leave at
M6 Nut upholstery height)
M6 Nut
Wide ring
Wide ring
flat washer
flat washer
EN
8
10