Important - dirna Bergstrom bycool COMPACT 1.4 Instrucciones De Montaje

COMPACT 1.4
EN
15

Important:

In order to prevent water from dripping, ensure
the original edgeband is tight against the base
of the unit, as shown in the diagram.
16
Place console with (4) originale screws, put
round 8 plastic trims on them.
15
Check
compression
thickness using a
tape measure in
the four corners.
16
18
Original edgeband
3÷6 mm.
Tighten nuts A until original
edgeband torque is between 3
and 6 mm.
®
15
Compact base
B
C
A
M8 selfblocking
16