Cleaning And Maintenance - cecotec CONGA 1190 Serie Manual De Instrucciones

ENGLISH
WARNING:The vacuum cleaner robot is equipped with an ON/OFF switch on its main body. As
a safety system, if the robot is switched OFF, all preset values will be restored. If you want the
vacuum cleaner robot to be programmed at a specific time, the switch must always be ON,
otherwise, you would need to program the cleaner again from the remote control.
MOPPING
The robot can mop the house after having vacuumed it just by replacing the dust tank for the
water one.
1. Attach the mop cloth to the bottom part of the tank and make sure it is properly fixed.
2. Open the water-tank deposit and pour water inside.
3. Press the dust tank release button to take it out and replace it with the water tank.
4. Select the desired cleaning mode, the robot will start vacuuming and mopping at the
same time.
Note: before installing the mop, in order to ensure a perfect scrubbing from the beginning, it
is suggested to moisten the mop with water evenly before using it

5.CLEANING AND MAINTENANCE

Turn the product off and unplug the charging base before cleaning or reparation.
CLEANING THE DUST TANK AND THE FILTERS
38