Overview Of Modes - BRAND HandyStep touch Instrucciones De Manejo

6 Overview of modes

Modes
Settings
Multi-Dispensing (MULTI-DISP)
Auto-Dispensing (AUTO-DISP)
Pipetting (PIP)
Sequential Dispensing (SEQ-DISP)
Multi-Aspiration (MULTI-ASP)
Titration
Favorites
Modes
Settings
Multi-Dispensing
Auto-Dispensing
Pipetting
Sequential Dispensing (SEQ-DISP)
Multi-Aspiration (MULTI-ASP)
Titration
Favorites
HandyStep® touch, HandyStep® touch S 997486
®
HandyStep touch
+
+
+
+
—
—
—
+
Description
In Settings mode, you set the device for your work, e.g. time,
display brightness. See Settings, p. 81.
In Multi-Dispensing mode, an aspirated volume is gradually
dispensed again. Example application: dividing an aspirated
volume into STEPs. See Multi-Dispensing (MULTI-
DISP), p. 84.
In Auto-Dispensing mode, a volume is aspirated and gradu-
ally automatically dispensed over a previously set time in-
terval. Example application: automatically dividing an aspi-
rated volume into numerous STEPs. See Auto-Dispensing
(AUTO-DISP) , p. 86.
In Pipetting mode, a previously selected volume is aspirated
once and dispensed again. See Pipetting (PIP), p. 88.
In Sequential Dispensing mode, an aspirated volume is dis-
pensed over several, preset STEPs of varying size. Example
application: dilution series. See Sequential Dispensing (SEQ-
DISP), p. 89
In Multi-Aspiration mode, several STEPs are collected in a
tip and aspirated and dispensed as a total volume. Example
application: removing residual volumes. See Multi-Aspira-
tion (MULTI-ASP), p. 91.
In Titration mode, a volume is aspirated and either quickly
or slowly dispensed. The dispensed volume can be read on
the display. Example application: determining pH values.
See Titration, p. 93.
In Favorites, you can save frequently used settings. You can
reopen these favorites using this menu. See Fa-
vorites, p. 95.
6 Overview of modes
®
HandyStep touch S
+
+
+
+
+
+
+
+
Operating manual
75