Handling Residual Volumes; Presetting The Step Count; Options - BRAND HandyStep touch Instrucciones De Manejo

9.4 Handling residual volumes

For information on handling residual volumes, see Switching to emptying, p. 80 and Aspirating liq-
uid, p. 78.

9.5 Presetting the STEP count

9.6 Options

a. In the operating mode, tap on the symbol
ð The Options menu appears.
Option
Add to Favorites
Preset the STEP count
Go to Auto-Disp
Operating Mode Help
HandyStep® touch, HandyStep® touch S 997486
1 Switch the STEP count preset on/off.
1
2 Open the preset STEP count.
3 Preset the STEPs.
You can preset a number of STEPs. The number of STEPs that
2
can be preset depends on the volume of the tips being used
and the set volume. If you increase the STEP volume, the
number of STEPs that can be preset is reduced, and vice
versa.
Presetting the STEP count
a. Tap on the
b. Drag the desired count into the white field.
c. Confirm the selection by pressing
ð The STEP count preset is active.
If you aspirate liquid now, the device aspirates as much liq-
uid as required for the preset. If there is more liquid in the tip
3
than preset, you can continue working after dispensing the
preset STEPs or discard the volume.
.
Meaning
Adds active settings to Favorites. You can open these again from
the main menu under Favorites.
Presets the STEP count.
Switches to Auto-Disp mode. The volume set in Multi-Disp mode is
also set in Auto-Disp mode.
Shows the help text for the mode.
9 Multi-Dispensing (MULTI-DISP)
button.
.
85
Operating manual