Machine Control Components List; Safety Instructions; Safety Equipment; Symbols Used In These Instructions - NSS Wrangler 2012 AB Manual De Operador

Machine Control Components
Wrangler 2012 DB
33. Twist grip handles. Controls the direction
and speed of the machine.
34. Battery Meter. Indicates the condition/
charge of the batteries.
35. Key switch. Enables machine operation.
36. Brush Circuit Breaker.
37. Controller and Driver Motor Circuit Breaker.
38. Vacuum Motor Circuit Breaker.
Wrangler 2012 AB
36. Brush Circuit Breaker.
38. Vacuum Motor Circuit Breaker.
39. Control Handles.
40. Brush/Pad switch lever. Turns the brush/
Pad motor and solution valve on-off.
41. Battery/Hour meter. Indicates the condi-
tion/charge of batteries and time brush/pad
motor is on.
42. Key switch. Enables machine operation.
(See Figure 5)
(See Figure 6)
ORIGINAL INSTRUCTIONS (EN)
IMPORTANT SAFETY INSTRUC-
TIONS
WARNING Read these original
instructions prior to initial use of the appliance/
machine.

Safety Instructions

This appliance has been approved for use on surfaces
with gradients up to 9%.

Safety Equipment

This appliance is equipped with devices to protect the
user, and must not be rendered inoperable or by-
passed.

Symbols used in these instructions

DANGER – Immediate danger that can cause
severe injury or even death.
WARNING – Possible hazard that could lead to
severe injury or event death.
CAUTION – Possible hazard that could lead to
mild injury or damage to property.
Electrical shock hazard.
Read the Operator Manual.
No smoking, open flames, or sparks near the
batteries.
Batteries - acid and hydrogen gas.
Poison. Causes severe burns. Avoid contact.
Recycle packaging.
Dispose of equipment through suitable collec-
tion systems.

Intended Use

The Wrangler 2012 AB and Wrangler 2012 DB are
intended for commercial use, for wet cleaning of
level floors in an indoor environment, for example in
hotels, schools, hospitals, factories, shops, offices and
rental businesses.
5