Yukon Signal N320RT Manual De Instrucciones página 11

Sound recording
This menu option allows you to activate/deactivate sound recording only during video recording.
Hold down the ZOOM (4) button to enter the main menu.
Use the IR (3) and REC (5) buttons to select submenu "
Enter the submenu with a short press of the ZOOM button.
Use the IR and REC buttons to select one of the options:
Yes – to activate sound recording.
No – to deactivate sound recording.
Confirm your selection with a short press of the ZOOM button.
When activating sound recording, the
deactivated.
The sound record icon is shown on the display in the VIDEO and PHOTO modes.
The set value is saved.
When the unit is next switched on, the display shows the latest saved value.
About device i
Hold down the ZOOM (4) button to enter the main menu.
Use the IR (3) and REC (5) buttons to select submenu "About device".
Enter the submenu with a short press of the ZOOM button.
This menu option shows the following service information about your device:
Name: Signal N320RT (name of the unit)
SKU: 28062 (model number)
Serial: 20119307 (serial number)
FW: 12.34.567 (software version)
HW: MNV001 (hardware version)
15
Sound recording ".
icon appears on the display. Icon is shown when sound is
10
DIGITAL ZOOM FUNCTION
This function allows you to control the unit's ZOOM mode. The display shows the full magnification value
which is the product of the optical and digital magnification.
You can use the ZOOM function only in VIDEO and PHOTO modes.
To activate the zoom, briefly press the ZOOM (4) button.
Cycle through the available full magnification options by briefly pressing the ZOOM button: 4.5x>9x>4.5x
The digital zoom value is retained only during the current session.
When the unit is next switched on, the full magnification value reverts to 4.5x.
11
DISPLAY OFF FUNCTION
This function deactivates the display, which allows you to eliminate light exposure caused by the glowing
display.
You can operate the DISPLAY OFF function in two modes: VIDEO and PHOTO.
To turn the display off, press and hold down the ON (2) button for more than a second.
The message Display off appears on the black display.
To activate the display, press briefly the ON button.
When the DISPLAY OFF function is activated:
All controls are inactive (except for the ON button).
Video recording continues (if video was recording before activating the DISPLAY OFF function).
The Wi-Fi function keeps running.
The DISPLAY OFF function deactivates when:
The ON (2) button is briefly pressed.
The unit is connected to a PC via the USB port (selection of operating modes appears - "power" or "USB
Mass Storage Device").
16