Operating Modes; Video Mode - Yukon Signal N320RT Manual De Instrucciones

To turn the display on, press br iefly the
To turn the unit off, press and hold down the
message "Switch off" , countdown will start from 3 to seconds, and the unit turns off.
Achieve a crisp image of the icons on the display by rotating the eyepiece diopter adjustment ring
Locate an object at a certain distance, achive a crisp image of the object by rotating the objective lens
To adjust display brightness, hold down the ZOOM (4) button. Use the navigation buttons (IR; REC) to
select icon , enter the submenu with a brief press of the ZOOM button.
Adjust the image brightness with navigation buttons REC (5) and IR (3) (adjustment range is 0 to 20).
When changing the viewing distance, achieve a sharp image by rotating the objective lens
no need to rotate the eyepiece - you have already made the necessary individual adjustment.
When the device starts, the built-in IR Illuminator (6) switches on automatically (first level). Press the IR
(3) button successively to change power level (3 levels are available). The corresponding icon
will appear in the upper part of the display
To turn the IR Illuminator off, press and hold down the
disappear.
To activate the digital zoom, briefly press the
upper part of the display, for example "4.5x".
Press the ZOOM button again to return to the initial magnification.
To start video recording, press briefly the REC (5) button.
5
ON button.
ON button for more than three second. The display shows
1
.
IR button for two seconds. The IR icon will
ZOOM button. Full magnification is constantly shown in the
8

OPERATING MODES

The operating modes are as follows:
Video (video recording)
(7) .
Photo (image capture)
(1) .
R eview (video and image review)
When first switched on, the unit is in Video mode. Switch between operating modes by a long press of the
REC (5) button. This enables you to cycle between modes (Video->Photo->Review->Video...)
(1) . There is

VIDEO MODE

Video recording mode is the default mode.
Video recording mode is shown by the
Sound recording is shown by the
Full magnification is shown with by special icon (i.e. 9x) on the display.
To start or stop video recording, briefly press the REC (5) button.
Video clips are saved in the internal Flash memory when video recording is stopped or the unit is turned
off.
VIDEO mode
01:42
icon on the display.
icon on the display.
ZOOM SOUND
9x
04:23pm
Current time
6