Safety Regulations - Corghi AGTT 1600A Manual De Uso

The equipment is intended for professional use only.
WARNING
Only one operator may work on the equipment at a time.
WARNING
Failure to comply with the instructions and danger warnings can cause serious injuries
to the operator or other persons.
Before starting up the equipment, always ensure you have read and understood all
the danger/warning signs in this manual.
In order to operate the machine correctly, it is necessary to be a qualified and authorised
operator, able to be trained and to know the safety regulations. Operators are expressly
forbidden from using the machine under the influence of alcohol or drugs capable of
affecting their capacity to perceive danger.
The following conditions are essential:
- read and understand the information and instructions described in this manual;
- have a thorough knowledge of the features and characteristics of the machine;
- keep unauthorised persons well clear of the working area;
- make sure that the machine has been installed in compliance with all relevant standards
and regulations in force;
- make sure that all machine operators are suitably trained, that they are capable of us-
ing the machine correctly and safely and that they are adequately supervised during
work;
- do not touch power lines or the inside of electric motors or other electrical equipment
before making sure that they have been powered off;
- read this booklet carefully and learn how to use the machine correctly and safely;
- always keep this operator manual in a place where it can be easily accessed and do not
neglect toconsult it.
WARNING
Do not remove or deface the DANGER, WARNING, CAUTION or INSTRUCTION decals.
Replace any missing or illegible decals. If one or more decals have been detached or
damaged, replacements can be obtained from your nearest CORGHI dealer.
- Observe the unified industrial accident prevention regulations relating to high voltages
and rotating machinery whenever the machine is in use or being serviced.
- Any unauthorised alterations made to the machine automatically release the manufacturer
from any liability in the case of damage or accidents attributable to such alterations.
Specifically, tampering with or removal of the machine safety devices is a breach of the
regulations relating to Safety at Work.
38

SAFETY rEGUlATIonS

Operator's manual AGTT 1600A - AGTT 1600